Computational Study on the Charge Transport and Optical Spectra of Anthracene Derivatives in Aggregates

A recent experiment [Angew. Chem. Int. Ed. 2017 , 56, 722–727] found that a (1 : 9) blend film of two anthracene derivatives, 2-fluorenyl-2-anthracene ( FlAnt ) and 2-anthryl-2-anthracence ( 2 A ), exhibit both efficient white light emission and high hole mobility, thus promising for organic light-emitting transistors (OLETs). Employing quantum chemistry at the polarizable continuum model (PCM) and the quantum mechanics/molecular mechanics (QM/MM) levels, we investigated the excited-state structures, optical spectra, band structure and the carrier mobility for FlAnt and 2 A from solution to aggregate phases. We suggest using the ratio of intermolecular excitonic coupling J and intramolecular excited state relaxation energy E to judge the bathochromic shift in optical emission in aggregates. For FlAnt , ρ=J/E is calculated to be less than 0.17, a critical value we identified earlier, and the spectra in solution and aggregate phases present quite similar features (blue emission). However, ρ is ∼0.5 for 2 A systems, and the calculated emission in the aggregate phase exhibits a remarkable bathochromic shift. In addition, the 0–0 emission is strongly suppressed in the herringbone stacking. These observations justify the experimental findings that (i) 2 A is blue emissive in solution but yellow-green in the aggregate phase, whereas FlAnt is always blue, and (ii) the blend of them show white emission. By using the “quantum nuclear tunneling” model we proposed earlier, we found the hole mobility for FlAnt and 2 A are 0.5 and 4.2 cm² V⁻¹ s⁻¹, respectively, indicating both are good hole transport materials.     

Analysis of new psychoactive substances in human urine by ultra‐high performance supercritical fluid and liquid chromatography: Validation and comparison

New psychoactive substances represent serious social and health problem as tens of new compounds are detected in Europe annually. They often show structural proximity or even isomerism, which complicates their analysis. Two methods based on ultra high performance supercritical fluid chromatography and ultra high performance liquid chromatography with mass spectrometric detection were validated and compared. A simple dilute‐filter‐and‐shoot protocol utilizing propan‐2‐ol or methanol for supercritical fluid or liquid chromatography, respectively, was proposed to detect and quantify 15 cathinones and phenethylamines in human urine. Both methods offered fast separation (<3 min) and short total analysis time. Precision was well <15% with a few exceptions in liquid chromatography. Limits of detection in urine ranged from 0.01 to 2.3 ng/mL, except for cathinone (5 ng/mL) in supercritical fluid chromatography. Nevertheless, this technique distinguished all analytes including four pairs of isomers, while liquid chromatography was unable to resolve fluoromethcathinone regioisomers. Concerning matrix effects and recoveries, supercritical fluid chromatography produced more uniform results for different compounds and at different concentration levels. This work demonstrates the performance and reliability of supercritical fluid chromatography and corroborates its applicability as an alternative tool for analysis of new psychoactive substances in biological matrixes.     

Chemical profiling of bioactive constituents in hop cones and pellets extracts by online comprehensive two‐dimensional liquid chromatography with tandem mass spectrometry and direct infusion Fourier transform ion cyclotron resonance mass spectrometry

Humulus lupulus L. (hop) is highly interesting from a nutraceutical perspective. The hop phytocomplex contains a wide range of bioactive metabolites, and its characterization is challenging. To tackle such a task, for the first time we applied and compared a combined approach consisting of online comprehensive two‐dimensional liquid chromatography with tandem mass spectrometry and direct infusion Fourier transform ion cyclotron mass spectrometry. A reversed phase × reversed phase approach with a shifted gradient in the second dimension ensured selectivity and two‐dimensional space coverage. Hyphenation with an ion trap time‐of‐flight analyzer led to the identification of 83 compounds in 70 min, comprising a novel quercetin derivative and six unknown bitter acids. On the other hand, the direct infusion method was able to identify 40 analytes (except isomers) with high mass accuracy (≤ 0.1 ppm) in less than 1 min analysis time. The developed approach can be used in a complementary way, combining the separation capability and high informative spectra of two‐dimensional liquid chromatography tandem mass spectrometry with the ultra‐high mass accuracy of direct infusion, for potential compound discovery or the accurate profiling of bioactive compounds in different hop cultivars as well as for monitoring processing and storage of hop‐based products.     

Rapid analysis of ultraviolet filters using dispersive liquid–liquid microextraction coupled to headspace gas chromatography and mass spectrometry

An ionic‐liquid‐based in situ dispersive liquid–liquid microextraction method coupled to headspace gas chromatography and mass spectrometry was developed for the rapid analysis of ultraviolet filters. The chemical structures of five ionic liquids were specifically designed to incorporate various functional groups for the favorable extraction of the target analytes. Extraction parameters including ionic liquid mass, molar ratio of ionic liquid to metathesis reagent, vortex time, ionic strength, pH, and total sample volume were studied and optimized. The effect of the headspace temperature and volume during the headspace sampling step was also evaluated to increase the sensitivity of the method. The optimized procedure is fast as it only required ∼7–10 min per extraction and allowed for multiple extractions to be performed simultaneously. In addition, the method exhibited high precision, good linearity, and low limits of detection for six ultraviolet filters in aqueous samples. The developed method was applied to both pool and lake water samples attaining acceptable relative recovery values.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

From Minutes to Years: Predicting Organotrifluoroborate Solvolysis Rates

Organotrifluoroborates solvolyze in water at rates that vary over five orders of magnitude. The negative logarithm of the solvolytic rate constant, pk_(B?F), correlates exceptionally well with the pK_a of the analogous carboxylic acid (R²=0.984). This unforeseen correlation may be of predictive value for several applications including Suzuki–Miyaura cross‐coupling reactions and the design of ¹⁸F‐organotrifluoroborate radioprosthetic groups.     

ICP-AES法测定高温合金中5种非金属元素

本文研究了快速测定高温合金中5种非金属元素(As、B、P、Se、Si)的分析方法,以满足高温合金行业对非金属元素检测的需求。利用王水和高氯酸对高温合金进行酸溶解,并系统研究了基体元素和共存元素对分析元素谱线的光谱干扰情况,同时进行了分析谱线的选择。5种非金属元素的检出限在5.5 ～ 11.9 ug/ml,5次数据的相对标准偏差(RSD,n=5)为0.9 % ～ 7 %,各元素的回收率在96 % ～ 102 %之间,该方法适用于高温合金中非金属元素的测定。     

Protic Anions [H(B12X12)]− (X=F,Cl, Br,I) That Act as Brønsted Acids in the Gas Phase

The acidity of protic cations and neutral molecules has been studied extensively in the gas phase, and the gas‐phase acidity has been established previously as a very useful measure of the intrinsic acidity of neutral and cationic compounds. However, no data for any anionic acids were available prior to this study. The protic anions [H(B₁₂X₁₂)]^? (X=F, Cl, Br, I) are expected to be the most acidic anions known to date. Therefore, they were investigated in this study with respect to their ability to protonate neutral molecules in the gas phase by using a combination of mass spectrometry and quantum‐chemical calculations. For the first time it was shown that in the gas phase protic anions are also able to protonate neutral molecules and thus act as Brønsted acids. According to theoretical calculations, [H(B₁₂I₁₂)]^? is the most acidic gas‐phase anion, whereas in actual protonation experiments [H(B₁₂Cl₁₂)]^? is the most potent gas‐phase acidic anion for the protonation of neutral molecules. This discrepancy is explained by ion pairing and kinetic effects.     

Determination of nitrofuran and chloramphenicol residues by high resolution mass spectrometry versus tandem quadrupole mass spectrometry

An ultra-high performance liquid chromatography based method, coupled to high resolution mass spectrometry (UHPLC–HRMS), was developed to permit the detection and quantification of various nitrofuran and chloramphenicol residues in a number of animal based food products. This method is based on the hydrolysis of covalently bound metabolites and derivatization with 2-nitrobenzaldehyde. Clean-up is achieved by a liquid/liquid and a reversed phase/solid phase extraction. Not only are the four conventional nitrofurans (nitrofurantoin, furazolidone, nitrofurazone and furaltadone) detected, but also nifursol, nitrovin and nifuroxazide. Furthermore, an underivatizable nitrofuran (nifurpirinol) and another banned drug (chloramphenicol) can be quantified as well. The compounds are detected in the form of their precursor ions, [M + H]⁺ and [M − H]⁻, respectively. The mass resolving power of 70,000 FWHM, and the applied mass window ensure sufficient selectivity and sensitivity. Confirmation is obtained by monitoring the HRMS resolved product ions which were derived from the unit-mass resolved precursor ions. The multiplexing capability of the utilized Orbitrap instrument provides not only highly selective, but also sensitive confirmatory signals. This method has been validated according to the CD 2002/657/EC for the following matrices: muscle, liver, kidney, fish, honey, eggs and milk.